TYPE05-manufacture,factory,supplier from China

 EN1092-1 FLANGE BS4504Size range: DN15 to DN2000Design:        type01 plate flange, type02 loose flange, type05 blind flange, type11 welding necking                       type12 slip on flange, type 13 threaded flangePressure:     PN6, PN10, PN16, PN25, PN40, PN64, PN100Material:  &n

EN1092-1 FLANGESize range: DN15 to DN2000Design: type01 plate flange, type02 loose flange, type05 blind flange, type11 welding necking             type12 slip on flange, type 13 threaded flangePressure: PN6, PN10, PN16, PN25, PN40, PN64, PN100Material: carbon steel C22.8, S235, S235JR, P235GH, stainless steel: 304/304L, 316/316L1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.

A flange is a method of connecting pipes, valves, pumps and other equipment to form a pipework system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or crewed into such systems and then joined with bolts.Product Specification:1. Standard:GOST 12820- 80  GOST 12821- 80 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6.

The tabulated ratings for welding neck flanges areindependent of components to which they may be attached, and the pressure rating of the flange shall not be exceeded. Attachment welds should be made in accordance with the applicable code or regulation. See para. 6.7 and Figs. 1 through 3 for weld end dimensional requirements.1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6.

Flange drills in EN1092-1 are generally the same as in BS4504 and DIN 2501, but the scope of EN1092-1 is wider. This manual includes tables EN1092-1 and BS4504. En 1092-1 for steel flanges, EN1092-2 for cast and ductile iron flanges1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9.

DIN FLANGESize range: DN15 to DN2000Design: slip on flange DIN2573,2576,2502,2503, 2543,2545             welding neck falnge DIN2631, 2632,2633,2634,2635              blind flange DIN 2527 PN6, PN10, PN16, PN25, PN40              threaded falnge DIN2565,2566,2567,2567              loose flange DIN 2641,2642,2656,2673Material: carbon steel ST37.2, stainless steel 1.4301, 1.44041. Standard:EN1092-1 2.

 DIN FLANGESize range: DN15 to DN2000Design: slip on flange DIN2573,2576,2502,2503, 2543,2545             welding neck falnge DIN2631, 2632,2633,2634,2635              blind flange DIN 2527 PN6, PN10, PN16, PN25, PN40              threaded falnge DIN2565,2566,2567,2567              loose flange DIN 2641,2642,2656,2673Material: carbon steel ST37.2, stainless steel 1.4301, 1.44041. Standard:EN1092-1 2.

Rat ings for welding neck flanges covered by this Standard are based upon their hubs at the welding endhaving thickness at least equal to that calculated for pipe having 276 MPa (40,000 psi) specified minimum yieldstrength.1 In order to ensure adequate flange hub thick ness for flange sizes NPS 2 and larger, the bore of awelding neck flange, dimension B in the various dimen sional t ables, shall not exceed Bmax det ermined asfollows: 1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662.

Features1. Material: steel,stainless steel, carbon steel2. Surface finish: polish, plated3. Machining: CNC4. Used for All Kinds of Industrial OEM Project1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9.

1. How can I get a quotation from you ?You can leave us message, and we will reply every message in time. Or we may talk on line by Trademanager.And you can also find our contact information on contact page.1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7.

Carbon Steel /Stainless Steel/ANSI B16.5/DIN2576/En1092 flange Class 150/300/600 PN10Slip on/welding neck/socket welding/lap joint/blind flange pipe fitting1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9.

Class is marked with 6 pressure ratingsThey are: Class 150; Class 300; Class 600; Class 900; Class 1500; Class 2500Product Specification: 1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:A105; A105N7. PackingWooden Case, Pallet.8.

It should be noted that this standard does not cover all flange sizes covered by the above DIN Standards.For flange dimensions not specified here, refer to DIN 2501-1. 1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order1.

Another layer of carbon steel flange means: according to the size and tolerance range required by the national standard production of flanges, different from the flange pieces not produced according to the standard size is also called two standard flanges (some people call non-standard flanges are incorrect), usually some unscrupulous merchants will reduce the thickness of the flange, the outer diameter of the two dimensions to achieve the purpose of saving materials, and the use of scrap steel or scrap steel1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133.

Flanged fittings with rating class designation 150 and 300 in sizes NPS 1 ⁄2 through NPS 24, with requirements given in both metric and U.S. Customary units with diameter of bolts and flange bolt holes expressed in inch unitsProduct Specification: 1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5.

PVC pipes,pipe fittings and valves is widely used in water supply,chemical industry,water treatment,enviromental protection,pharmaceutical area etc.It has following advantages:Light weightHigh strengthLow resistanceCorrosion resistanceEasy installationLong service lifeLow costNon-toxic and sanitationProduct Specification: 1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004.

Material:But according to ASTM, JIS, DIN, GB standardASTM: 304, 304 L, 316 L, 316, and 316 Ti, 317, 317 L, 321, 321 H, etcJIS: SUS304, SUS304L, SUS316 SUS316L, SUS316Ti, SUS317L, SUS321, SUS321H, etcDIN: 1.4301, 1.4306, 1.4401, 1.4435, 1.4571, 1.4436, 1.4438, 1.4541, etcGB: 0 Cr18N9, 00 Cr19Ni101. Standard:BS4504 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6.

Pressure–temperature ratings are maximum allowable working gage pressures in bar units at the temperatures in degrees Celsius shown in Tables 2-1.1 through  2-3.19 for the applicable material and class designation.  Tables II-2-1.1 through II-2-3.19 of Mandatory  Appendix II list pressure–temperature ratings using psi  units for pressure at the t emperature in degrees  Fahrenheit. For intermediate temperatures, linear interpolation is permitted. Interpolation between class designations is not permitted.  

Coating: black paint, yellow transparent paint, cold and hot dip galvanizePackage: sea worthy plywooden case, wooden pallet1. Standard:GOST 12820- 80  GOST 12821- 80 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order1.

Q: Can you produce the products according to my own drawings?A: Yes, we can produce the products according to your drawings.we have profession engineers in our factory .1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:A105; A105N7. PackingWooden Case, Pallet.8.

Flange types:Weld NeckThis flange is circumferntially welded into the system at its neck which means that the integrity of the butt welded area can be easily examined by radiography. The bores of both pipe and flange match, which reduces turbulence and erosion inside the pipeline. The weld neck is therefore favoured in critical applications.Slip OnThis flange is slipped over the pipe and then fillet welded. Slip-on flanges are easy to use in fabricated applications.BlindThis flange is used to blank off pipelines, valves and pumps, it can also be used as an inspection cover.

  The pressure marking specified in this standard is divided into PN marking and Class marking.PN marking has 12 pressure ratingsThey are: PN2.5; PN6; PN10; PN16; PN25; PN40; PN63; PN100; PN160; PN250; PN320; PN4001. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6.

Flanges Introduction:A flange is a method of connecting pipes, valves, pumps and other equipment to form a pipework system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or crewed into such systems and then joined with bolts.Product Specification:1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.

Any spot facing or back facing shall not reduce the flange thickness to less than the flange thicknessspecified. When spot facing is used, the diameter shall be large enough to accommodate the outside diameter of the equivalent normal series of washers in accordance with EN ISO 887 for the bolt size being fitted. The bearing surfaces for the bolting shall be parallel to the flange face within the limits given in Table 22. When a flange is back faced a minimum fillet radius, R2 (see Figure 17) in accordance with Table 23 shall be maintained.1.